Blog

Coursehelp
January 11, 2019
QUESTION : No Comments

In this assignment, you will be critically evaluating the vision, values, mi

Case Assignment

In this assignment, you will be critically evaluating the vision, values, mission statement, and goals/objectives of the Coca-Cola Company.

Keys to the Assignment

After studying the background materials and completing the SLP, you are in an excellent position to evaluate a company’s published mission, vision, values, and objectives/goals. This Case asks you to begin your strategic analysis of the Coca-Cola Company by evaluating the company’s mission, vision, values, and goals. To do this, observe the following procedure:

  • Step 1: Visit the official website of the Coca-Cola Company and identify the company’s vision, mission, values, and goals. (Hint: You’ll need to do some exploring and a certain amount of speculation—as the terms “vision” and “mission” (and sometimes even the term “company goals”) are used interchangeably. Explore the “Our Company” and “Investors” links. Also, be sure that you look closely at the most recent Annual Reports.
  • Step 2:Critically evaluate the mission, vision, values, and goals (again, you’ll likely need to make decisions as to which is which). Use the criteria in the background materials to support your assessment of the quality of the company’s mission, vision, values, and goals.
  • Step 3: Determine which (if any) of the elements consider the goals and needs of specific stakeholder groups. Write down any examples.
  • Step 4: Consider what changes are needed to improve the vision statement, the mission statement, the statement of company values, and the company’s objectives and goals.
  • Step 5: Write a 6-7 page paper addressing the above requirements. You must meet minimum length requirements, by responding to each step above with precision and with depth of critical thinking.

NOTE THE FOLLOWING REQUIREMENTS AS WELL:

  1. Use of proper APA style is required in this course. Therefore, prepare your Case with proper documentation of sources, using in-text citations and a complete end reference list. Refer to the Well-Written Paper guide if you are not familiar with APA style.
  2. Consider the Case as a formal business report that you are developing for the Board of Directors and CEO as the Coca-Cola Company consultant. This is a professional document. Follow the format below:
  3. Note: You must use section headings to respond to all major requirements in all papers. Your section headings should appear similar to the following:
  • Executive summary: This is a synopsis of the main points, conclusions, and recommendations made in the longer report. If you have never written an executive summary before, or would like a refresher, check this link: http://www.csun.edu/~vcecn006/summary.html
  • Introduction: State the main purpose of the paper (thesis statement), what you hope to accomplish, and how you will go about doing it.
  • Main Body: The “meat” of the paper. Emphasize analysis, not just description. Don’t just give me facts – interpret them! Delineate separate topics or sections with appropriate use of headings.
  • Executive Summary
  • Introduction
  • Company’s Mission Statement and Analysis
  • Company’s Vision and Analysis
  • Company’s Values and Analysis
  • Alignment of Company’s Mission, Vision, Values, and Goals with Stakeholders’ Interests
  • Recommended Changes
  • Conclusion

Expert Answer

Coca-Cola Company Mission, Vision and Value Analysis

By Student Name

Institution Affiliation

Instructor

Course

Date

Executive Summary

The paper discusses the coca cola company mission, vision, and values. The paper presented the analysis of the coca cola operational mission statements, visions statements, and value that determines the sustainable growth and development of the company. Further, the paper highlights the brief . . . .

OR
OR

Have a Comment on this Question?

Questions viewed by other students


  • QUESTION : (Solved) : Would Like Help Getting Code Question C Benchmarsk Sorting Methods Listed Using Visual St Q29139380 . . .

    I would like some help getting the code for the question belowin C++.

    Benchmarsk each of the sorting methods listed below using visualstudio.

    Insertion Sort, Bubble Sort Heap Sort. Quick Sort. MergeSort.

    Benchmark each of the above sorting methods for data sizes of10000, 20000, 30000, 40000 and 50000. Display the results in atable as shown below. The table should have rows and columns.However, the rows and columns need not be separated by lines.
      

    Data Size

    Heap Sort Time In Seconds

    Merge Sort Time In Seconds

    Quick Sort Time In Seconds

    Quadratic Sort Time In Seconds

    100000

    200000

    300000

    400000

    500000

    Notes:

    ? Do not use a local array for keeping data values. Use a globalarray for this purpose. You can use dynamically allocated arrays ifyou wish.

    Generate the data using a random generator and store it in aglobal array for use in sorting. If you use a local array of largesize, you will run out of stack space.

    ? Calculate the time taken by a sort routine in seconds asbelow:

    #include

    clock_t start, finish;
    start =clock( ); //time in milliseconds
    sort( );
    finish=clock( ); //time in milliseconds
    //the constant CLOCKS_PER_SEC below is equal to 1000
    double duration = (double) ( (finish-start)/CLOCKS_PER_SEC );//time in secs.

    Expert Answer


    . . .


    view full answer
  • QUESTION : (Solved) : Write Arm Assembly Language Routine Count Number 1s 32 Bit Word R0 Return Result R1 Code F Q34564596 . . .

    Write an ARM assembly language routine to count the number of 1sin a 32‐bit word in r0 and return the result in r1.

    code:

    LDR r0, 0x11AB003F dummy value for rl (11 ones) MOV r1,#0x0 MOV r2,#32 MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount ; clear ones counter ;use r2 as the loop counter i Repeat: rotate ro right set Ilags ;if carry set increment 1s counter ; decrement loop counter until all bits tested OnesCount If this was a subroutine Count, the code might be area test, cODE, readwrite ADR sp, Stackl LDR r2 , =0xFFFFFFFF STR r2, [sp] LDR r0, - 0xFFAB123A BL MOV r3,rl NOP NOP ;set up dummy r2 ; dummy data :call routine ; read result Count STMFD sp!, (r2,lr] MOV r1, #0x0 MOV r2,#4 Count ; save r2 and return on the stack onesCount MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount LDMFD sp!, (r2,pc) ; restore r2 and returr Stack Stackl DCD 0,0,0,0,0 DCD 0,0,0,0,0

    The following image is a screendump after executing the abovecode. Register r3 contains 0x13 which is 19, the
    number of 1s in 0x11AB003F.

    CAUsers AlanCore7 Desktop ForBrusselsMay2012Chap3Problems.uvproj - pVision4 File Edit iew Project Flash Debug Peripherals Tools SVCS Window Help Registers 3Chap3Problems.asm area test, CoDE, readwrite ADR p, Stackl LDR r2,=0xEEEEEEEE STR r2, [ap] LDR ro, - 0XEEAB123A ;dummy data BL Count MOV 3,rl B Parkilere RegisterValue0 Current OF FAB123A 0x00000013 :set up dumay x2 R1 000000013 call routine : read result endless loop R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 (5P) 0x00000054 R14 (LR) 000000014 R15 (PC) 000000018 0 ParkHere NOP 0 count STMED sp!, 2,1x) MOV Nov saver and return on the stacik r1, #0x0 r2, #32 13 onescount Movs ro,r0 , ROR #1 ADDcs r1,r1, #1 SUBS r2, r2, 1 BNE Onescount 15 restore r2 and return Stack DCD o,o, o, 0,0 User/System Fast Interrupt Interrupt 20 Stack DCD 0,0,0,0,0 21 END Project E Registers Simulation

    LDR r0, 0x11AB003F dummy value for rl (11 ones) MOV r1,#0x0 MOV r2,#32 MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount ; clear ones counter ;use r2 as the loop counter i Repeat: rotate ro right set Ilags ;if carry set increment 1s counter ; decrement loop counter until all bits tested OnesCount If this was a subroutine Count, the code might be area test, cODE, readwrite ADR sp, Stackl LDR r2 , =0xFFFFFFFF STR r2, [sp] LDR r0, – 0xFFAB123A BL MOV r3,rl NOP NOP ;set up dummy r2 ; dummy data :call routine ; read result Count STMFD sp!, (r2,lr] MOV r1, #0x0 MOV r2,#4 Count ; save r2 and return on the stack onesCount MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount LDMFD sp!, (r2,pc) ; restore r2 and returr Stack Stackl DCD 0,0,0,0,0 DCD 0,0,0,0,0 CAUsers AlanCore7 Desktop ForBrusselsMay2012Chap3Problems.uvproj – pVision4 File Edit iew Project Flash Debug Peripherals Tools SVCS Window Help Registers 3Chap3Problems.asm area test, CoDE, readwrite ADR p, Stackl LDR r2,=0xEEEEEEEE STR r2, [ap] LDR ro, – 0XEEAB123A ;dummy data BL Count MOV 3,rl B Parkilere RegisterValue0 Current OF FAB123A 0x00000013 :set up dumay x2 R1 000000013 call routine : read result endless loop R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 (5P) 0x00000054 R14 (LR) 000000014 R15 (PC) 000000018 0 ParkHere NOP 0 count STMED sp!, 2,1x) MOV Nov saver and return on the stacik r1, #0x0 r2, #32 13 onescount Movs ro,r0 , ROR #1 ADDcs r1,r1, #1 SUBS r2, r2, 1 BNE Onescount 15 restore r2 and return Stack DCD o,o, o, 0,0 User/System Fast Interrupt Interrupt 20 Stack DCD 0,0,0,0,0 21 END Project E Registers Simulation Show transcribed image text LDR r0, 0x11AB003F dummy value for rl (11 ones) MOV r1,#0x0 MOV r2,#32 MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount ; clear ones counter ;use r2 as the loop counter i Repeat: rotate ro right set Ilags ;if carry set increment 1s counter ; decrement loop counter until all bits tested OnesCount If this was a subroutine Count, the code might be area test, cODE, readwrite ADR sp, Stackl LDR r2 , =0xFFFFFFFF STR r2, [sp] LDR r0, – 0xFFAB123A BL MOV r3,rl NOP NOP ;set up dummy r2 ; dummy data :call routine ; read result Count STMFD sp!, (r2,lr] MOV r1, #0x0 MOV r2,#4 Count ; save r2 and return on the stack onesCount MOVS r0,r0, ROR #1 ADDCS r1,r1,#1 SUBS r2 , r2 , #1 BNE OnesCount LDMFD sp!, (r2,pc) ; restore r2 and returr Stack Stackl DCD 0,0,0,0,0 DCD 0,0,0,0,0
    CAUsers AlanCore7 Desktop ForBrusselsMay2012Chap3Problems.uvproj – pVision4 File Edit iew Project Flash Debug Peripherals Tools SVCS Window Help Registers 3Chap3Problems.asm area test, CoDE, readwrite ADR p, Stackl LDR r2,=0xEEEEEEEE STR r2, [ap] LDR ro, – 0XEEAB123A ;dummy data BL Count MOV 3,rl B Parkilere RegisterValue0 Current OF FAB123A 0x00000013 :set up dumay x2 R1 000000013 call routine : read result endless loop R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 (5P) 0x00000054 R14 (LR) 000000014 R15 (PC) 000000018 0 ParkHere NOP 0 count STMED sp!, 2,1x) MOV Nov saver and return on the stacik r1, #0x0 r2, #32 13 onescount Movs ro,r0 , ROR #1 ADDcs r1,r1, #1 SUBS r2, r2, 1 BNE Onescount 15 restore r2 and return Stack DCD o,o, o, 0,0 User/System Fast Interrupt Interrupt 20 Stack DCD 0,0,0,0,0 21 END Project E Registers Simulation

    Expert Answer


    . . .


    view full answer
  • QUESTION : (Solved) : Write Arm Program Armsim Following Read Text File Called Inputtxt String Characters Upperc Q32561711 . . .

    Write an ARM program in ARMSim# that will do the following:​

    Read the text from a file called “input.txt” as a string ofcharacters
    Uppercase every consonant
    Replace all vowels with an asterisk (*)
    Output the new string from memory to a file called”output.txt”
    For example:
    “input.txt” contains “Blind love couldn’t win as the facts all camein. But I know I’ll again chase after wind. What have I got if nota thought?”
    “output.txt” should contain “BL*ND L*V* C**LDN’T W*N *S TH* F*CTS*LL CAME *N. B*T * KN*W *’LL *G**N CH*S* *FT*R W*ND. WH*T H*V* *G*T *F N*T * TH**GHT?”
    Meeting the above requirements is a bare minimum for theassignment. In order to get full credit, your program should:

    have appropriate comments
    check for errors
    have a readable output
    Please submit a single file called “project2.s” to theassignment.

    Expert Answer


    . . .


    view full answer